1.Material: PCB board and electronic component

2.Color: as the pic shows

3.Input voltage: 5-40V

4.Output voltage: 1.2-35V (continuously adjustable)

5.Output Current: 9A (power tube temperature exceeds 65°C please add cooling fan)

6.Constant current range:0.2-9A ( adjustable )

7.Output Power: Maximum power is about 300W (power tube temperature exceeds 65°C please add cooling fan)

8.Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)

9. Conversion efficiency: up to about 95%

10. Operating frequency: 180KHZ

11. Output ripple: 20M bandwidth

12. Input 24V Output 12V 5A ripple around 50mV (Excluding noise)

13. Output short circuit protection : Yes, constant current

14. Input Reverse Polarity Protection: None

15. Output prevent backflow: None

16. Wiring: Terminal

17. No-load current: Typical 20mA (24V switch 12V)

18. Load regulation: ± 1% ( constant )

19. Voltage regulation: ± 1%

20. Dynamic response speed: 5% 200uS

21. Potentiometer adjustment direction: clockwise (increase) , counterclockwise (decrease).

     the potentiometer(CV) closed to the input voltage is used to regulate voltage,

     the potentiometer(CC) closed to output voltage is used to regulate current (CC)

22. Operating temperature: Industrial grade (-40 °c to +85 °c)

     ( please note the actual use of the power tube temperature , high temperature heat strengthened please )

23. Indicator: dual color indicator, charging indicator light is red, the green light means fully charged ( No load is green )

24. Size(approx): 65 x 47 x 22mm(L x W x H)